Camera inspection: $300–$750
The first and non-negotiable step. Most operators credit it against the works if you proceed.
CCTV Surveyed, Then Relined
No-Dig Pipe
Relining In
Glebe
A cracked or root-damaged drain does not have to mean a trench through the garden. A resin liner is cured inside the existing pipe from an access point you already have, sealing every joint along the run, and the surface above is never touched.
- Licence 368473C, fully insured
- CCTV survey before any quote
- Nothing dug up, nothing reinstated
Why No-Dig Suits The Drains In Glebe
Relining is a structural repair, not a cleaning method, and the distinction matters when you are comparing quotes. Jetting restores flow through a pipe that is still cracked. A liner restores the pipe.
That also means it is not always the answer. It cannot correct a run that has sagged or lost its fall, and it has nothing to line against where a section has collapsed. A camera survey separates those cases in about an hour, and the answer changes the cost by a multiple.
Conservation areas and what is actually restricted
A listing does not stop you repairing a drain. What it restricts is change that is visible or that disturbs significant fabric, which is precisely what a trenchless repair avoids.
In practice that makes relining the path of least resistance on a listed or conservation-area property: nothing is removed, nothing changes above ground, and there is no reinstatement to get approved.
Relining a trading premises without closing it
Glebe Point Road’s busy eateries and terrace kitchens push fats and food scraps into drains that build up and block over time.
For a shop, café or clinic the real cost of a drainage repair is rarely the invoice. It is the days the doors do not open, and an excavation through a floor or a car park is measured in days.
A liner is installed from an existing access point and cures in hours, which is why commercial work is so often scheduled overnight or across a single closed day. The trading interruption is usually the deciding factor, not the price per metre.
Ground that moves, joints that open
Low-lying streets near Blackwattle Bay drain slowly, so heavy downpours overload gullies and back water into basements and courtyards.
Ground near water holds more of it, sits lower and moves more through the seasons than ground further up. Pipework laid decades ago has been flexed by that movement for its whole life, and joints open a fraction at a time rather than failing all at once.
It is why faults here tend to arrive as a slow decline rather than a sudden break, and why a camera often finds a run that is uniformly tired instead of one obvious defect. That pattern suits a full-length liner rather than a patch.
Groundwater going the wrong way
An open joint leaks in both directions. On a low-lying block that means stormwater and groundwater entering the sewer through cracks, which is called infiltration, and it quietly overloads a line that would otherwise cope.
It shows up as a system that backs up in wet weather and behaves perfectly in dry. If that is the pattern, sealing the run is the fix, and no amount of clearing will reproduce the result.
Layers of previous work, and what the camera finds
An older house is rarely on one generation of drainage. It is on three or four, joined wherever a bathroom moved or an extension went on, and the transitions between materials are where most faults sit.
A camera run on a property like this is genuinely diagnostic rather than a formality. It is common to find a sound original clay run, a poor 1970s junction, and a modern PVC section all on the same line, each needing a different answer.
What it costs in Glebe
Per metre for a liner, $500–$900
Domestic sewer across Sydney in 2026. Longer single runs sit at the lower end of it.
A junction or patch repair, $1,500–$4,000
Seals one defect. Right where the rest of the run is sound and the ground is stable.
A whole domestic line, $6,000–$15,000
Length, diameter and how many branches need reinstating are what move the number inside that band.
Digging it up, from $2,500 plus making good
Excavation is only half the cost. Replacing the driveway or garden above it is the other half.
Indicative Sydney ranges for 2026. Your job is quoted in writing after the camera survey. Figures here are indicative of the 2026 Sydney market rather than a quote from us, you get your own number as a fixed price before any work starts.
From Survey To Finished Liner
Step 01
Step 01
Camera The Line
A CCTV survey establishes the material, the diameter, where the defects are and how far they sit from the access. You see the footage, and it is what the quote is built from.
Step 02
Agree The Method
Patch or full length, and occasionally excavation instead. We will tell you when digging is the better answer even though it is the bigger quote.
Step 03
Clean, Line And Cure
The run is jetted so the liner bonds to pipe rather than debris, the liner is installed through the existing access, and it cures in place. Most domestic jobs are a single day.
Step 04
Reinstate And Re-Camera
Every branch the liner passed is reopened from inside, then the run is cameraed again so you can see it is continuous and the junctions are clear.
Not Sure If It Needs Relining At All?
Describe what the drain is doing and how often. We will tell you whether it sounds structural or whether a clean and a maintenance interval is the honest answer.
Relining, Answered Properly
Cost, lifespan, method, and the cases where a liner is the wrong answer.
Relining is priced per metre and the range across Sydney in 2026 is roughly $500 to $900 a metre for a domestic sewer, with junction reinstatement and access usually quoted separately. A short patch repair over a single defect commonly lands between $1,500 and $4,000, and a full-length domestic run more often sits between $6,000 and $15,000. The honest comparison is not liner against nothing: it is liner against excavation plus reinstating whatever sits on top of the pipe.
Usually, but not always, and anyone who says always is selling. Relining wins wherever something valuable sits above the pipe: a driveway, established garden, paving, a building, or trading days you cannot afford to lose. Excavation wins on an open lawn with a shallow line, and it is the only answer where the pipe has collapsed, lost its fall or been crushed out of round. A camera survey is what tells you which case you are in.
Yes, and no honest quote exists without one. The survey establishes the pipe material and diameter, where the defects sit and how far they are from an access point, whether the fall is intact, and where the junctions are. Ask for the footage afterwards. It is your property, it is the evidence behind the price, and it is what an insurer, a strata manager or a buyer will want to see later.
Because it is rarely on one generation of drainage. Original clay, a 1970s junction and a modern PVC section on the same line is a normal finding, and the transitions between them are where most faults sit. A slower survey is what prevents relining a run that actually needed one junction rebuilt.
Clean it and camera it before deciding. Relining a greased line without addressing the grease gives you a smooth new surface to coat and barely changes the interval. Where the camera shows cracks or open joints under the build-up, relining is worth doing and the smoother bore does slow re-accumulation. Where the barrel is sound, a jetting schedule is the cheaper and more honest answer.
Where the water table sits close to the pipe, every open joint is an entry point for groundwater. The line runs fuller than it should year-round and silt comes in with the water, so the system behaves as though it is undersized when it is actually leaking inward. Sealing the run is one of the clearest before-and-after results relining produces.
It is groundwater and stormwater entering the sewer through cracks and open joints, and it matters more than most people expect. It quietly overloads a line that would otherwise cope, which shows up as a system that backs up in wet weather and behaves perfectly in dry. If that is your pattern, sealing the run is the fix and clearing will never reproduce it.
Get A Pipe Relining Quote In Glebe
Phone is quickest. The form reaches the crew covering Glebe, and the first step is always the survey.
